Solar Inverter-manufacture,factory,supplier from China

Product DetailsThe inverter is designed to stabilize voltage and frequency fluctuations during operation, ensuring consistent performance. It includes built-in protection mechanisms such as overload, short circuit, and over-temperature protection to safeguard against abnormal conditions. Additionally, the inverter features intelligent monitoring to continuously assess the health of the system, transmitting real-time operational data for maintenance and troubleshooting.

Product DetailsThis metal-clad vacuum switchgear with VCP-W breakers is designed for high performance and safety. Built to comply with ANSI, NEMA, and IEEE standards, it features arc-resistant models to ensure protection during fault conditions. Its modular design allows for flexible configurations, accommodating a variety of breaker arrangements and auxiliary compartments.

Technical ParametersRated Capacity: 2500kVARated Voltage: High-voltage side 10kV, low-voltage side 0.4kVRated Current: High-voltage side approximately 125A, low-voltage side approximately 5982AConnection Group Number: Dyn11Insulation Thermal Class: Class F or Class HWinding Temperature Rise Limit: 100K (Class F) or 125K (Class H)Partial Discharge Quantity: Less than 5pcShort Circuit Impedance: 4% to 6%Frequency: 50HzCooling Method: Natural Air Cooling (AN) or Forced Air Cooling (AF)Protection Level: IP20 or IP23Noise Level: Generally not exceeding 55dBApplication ScenariosThe SCB14-2500 dry-ty

Technical ParametersRated Capacity: 1250 kVA (kilovolt-amperes), indicating the maximum apparent power that the transformer can transmit.Voltage Level: Specific primary and secondary voltages should be referenced in the product specification sheet, but typically, this type of transformer is suitable for medium and low voltage power grids, such as configurations like 10 kV/0.4 kV.Frequency: 50 Hz or 60 Hz, depending on the standard of the power system in the region where it is used.Connection Group: Common types include Dyn11, Yyn0, etc., which specify the electrical connection method between t

Technical ParametersCapacity: 1600 kVA (kilovolt-amperes), indicating the transformer's maximum output power.Voltage Levels: Specific values are not provided, but typically include two voltage values for the high-voltage and low-voltage sides.

Technical SpecificationsRated Capacity: 1600kVARated Voltage: High-voltage side 10kV, Low-voltage side 0.4kVRated Current: High-voltage side approximately 88.68A, Low-voltage side approximately 3632.5AConnection Group Number: Dyn11Insulation Thermal Class: Class F or Class HWinding Temperature Rise Limit: 100K (Class F) or 125K (Class H)Partial Discharge Quantity: Less than 5pcShort Circuit Impedance: 4% to 6%Frequency: 50HzCooling Method: Natural Air Cooling (AN) or Forced Air Cooling (AF)Protection Level: IP20 or IP23Noise Level: Typically not exceeding 55dBApplication AreasThe SCB18-1600 dr

Product DetailsThe functional wind power photovoltaic combined box transformer is an all-in-one substation designed specifically for wind farms and photovoltaic fields. Pre-assembled in the factory, it includes the booster transformer, high-voltage switch, low-voltage switch, and other auxiliary equipment, all housed in a single unit. The product integrates the advantages of Oubian and Mebian technologies, offering a new type of booster equipment tailored to the specific needs of renewable energy sectors.

Technical ParametersKey Indicators:Rated Capacity: 1000 kVA (kilovolt-amperes), indicating the maximum apparent power that the transformer can transmit.Voltage Level: Specific voltage values for both the high-voltage and low-voltage sides are usually provided, such as 10/0.4 kV, etc.Short Circuit Impedance: An important parameter affecting system stability and the magnitude of fault currents.No-Load Loss: The electrical energy consumed by the transformer when there is no load, where amorphous alloy transformers perform exceptionally well.Load Loss: The energy loss when the transformer is opera

Technical ParametersRated Capacity: 1250 kVA (kilovolt-amperes), indicating the maximum apparent power that the transformer can handle.Voltage Level: Specific values are not given, but it typically indicates the operating voltage range of the primary side (input) and secondary side (output).

Technical ParametersCapacity: 2000 kVA (kilovolt-amperes), indicating its maximum output power.Voltage Level: Specific values should be referenced from the product manual or information provided by the manufacturer, but typically indicate the rated voltage for both the primary and secondary sides.Frequency: Generally 50 Hz or 60 Hz, suitable for different regional grid standards.Insulation Class: Choose appropriate insulation materials based on the actual application environment to ensure electrical safety.Cooling Method: Natural air cooling or forced air cooling, among others.Noise Level: Low

Technical ParametersRated Capacity: 2500 kVA (kilovolt-amperes), indicating the maximum apparent power that the transformer can continuously transmit at the rated voltage.Frequency: Typically 50 Hz or 60 Hz, depending on the power grid standards of the region where it is used.Voltage Levels: The specific voltage values for the primary side (high voltage side) and secondary side (low voltage side) need to be determined based on the actual application scenario, but common configurations may include 10 kV / 0.4 kV, etc.Connection Group: Such as Dyn11, indicating the phase relationship between the

 Below are some basic technical parameters and applications of this model of transformer:Technical Parameters:Capacity: 100 kVA (specific values may vary slightly depending on the manufacturer)Voltage level: Typically 10/0.4 kV or customized according to user needsFrequency: 50 HzConnection group: Common types include Dyn11, etc.Insulation thermal class: F or aboveEfficiency: Meets the energy efficiency limits and energy-saving evaluation values specified in Chinese National Standard GB 20052Noise level: Below the standard-specified valuesProtection level: IP20 or higherApplications:Civil

Technical Parameters:Rated Capacity: 800 kVA (This refers to the maximum power that the transformer can continuously transmit.)Voltage Level: Specific values for the primary (input side) and secondary (output side) voltages, such as 10/0.4 kV, depending on the actual application needs.Frequency: Usually 50 Hz or 60 Hz, suitable for different national and regional grid standards.No-load Loss: Represents the amount of energy consumed by the transformer when there is no load.Load Loss: The energy consumed by the transformer when operating at full load.Short-circuit Impedance: Reflects the degree

Technical ParametersRated Capacity: 80 kVA (kilovolt-amperes), indicating the maximum power at which the transformer can operate continuously.Voltage Levels: Specific values should be referenced from the product manual or information provided by the manufacturer, typically including the voltage values for the primary side (input) and secondary side (output).No-load Loss: Very low, which is a significant advantage of amorphous alloy transformers, helping to reduce energy waste.Load Loss: Also relatively low, making it more energy-efficient compared to traditional silicon steel sheet transformer

Rated capacity: 1000 kVAVoltage level: Customizable according to actual needs, common options include 10/0.4 kV, etc.Frequency: 50 Hz or 60 HzConnection group: Yyn0, Dyn11, etc.No-load loss: Relatively low, specific values need to be checked in the product manual.Load loss: Also relatively low, specific values need to be checked in the product manual.Insulation class: F or higherCooling method: Natural air cooling (AN) or forced air cooling (AF)Noise level: LowDimensions and weight: Depending on specific designApplications:Distribution link in power systems: Suitable for urban power grid trans

Product DetailsThe Dry transformer is a reliable, safe, and efficient solution for power distribution, designed without the need for transformer oil, making it ideal for indoor and environmentally sensitive applications.Key FeaturesSafe and Flame Retardant: The transformer is pollution-free, explosion-proof, and has a high flame-retardant rating, ensuring safe operation.Energy Efficiency: Offers low loss, low noise, and low temperature rise, providing significant energy savings.Strong Overload Capacity: Equipped with F-class insulation for excellent heat resistance and robust performance under

Features:- Utilizes high-quality insulating oil or dry design, offering excellent insulation performance and heat dissipation effects; equipped with explosion-proof devices to ensure operational safety.- Low noise: Optimized core and winding structures effectively reduce the noise level during operation, making it particularly suitable for noise-sensitive environments.- Strong resistance to short circuits: Amorphous alloy materials have high mechanical strength, capable of withstanding large short-circuit current shocks.- Small size, light weight: Compared to traditional silicon steel core tra

Technical ParametersThe technical parameters include but are not limited to:Rated capacity: 630 kVAVoltage levels: Depending on the specific application, various combinations are possible, such as 10/0.4 kV, etc.Frequency: 50 Hz or 60 HzCooling method: Typically oil-immersed self-cooling or forced air-coolingInsulation level: According to national standardsNoise level: Relatively low, as amorphous alloy materials help reduce noiseNo-load loss: Much lower than traditional silicon steel sheet transformersLoad loss: Also superior to traditional transformersApplicationsThe SBH21-M.RL-630 amorphous

The S22-M-100 is an oil-immersed transformer with a rated capacity of 100kVA (kilovolt-amperes). This model belongs to the S22 series, which is a new generation of high-efficiency and energy-saving distribution transformers.

The S22-500 is an oil-immersed transformer with a rated capacity of 500kVA (kilovolt-amperes). This model belongs to the S22 series, representing the new generation of high-efficiency and energy-saving distribution transformers.

The S22-M-630 is an advanced oil-immersed transformer with a rated capacity of 630kVA, part of the S22 series that represents the next generation of high-efficiency, energy-saving distribution transformers.

Main Features:(1) High Efficiency and Energy SavingLow loss design: Amorphous alloy materials have extremely low hysteresis loss and eddy current loss, significantly reducing no-load and load losses, and improving the energy efficiency ratio.Energy-saving effect: Compared with traditional silicon steel sheet transformers, the energy efficiency ratio is significantly improved, and long-term operation can greatly save electricity.(2) Environmental Protection and SafetyInsulation and heat dissipation: High-quality insulating oil or dry design is adopted, with good insulation performance and heat

The S22-M-1250 is an oil-immersed transformer with a rated capacity of 1250kVA, designed as part of the S22 series, a new generation of highly efficient and energy-saving distribution transformers. It offers superior energy efficiency and reliability, meeting the latest energy standards.Main Features:Energy Efficiency: With optimized materials and design, this transformer reduces energy consumption and operating costs while meeting the latest energy efficiency regulations.Environmental Safety: The use of high-quality insulating oil ensures excellent insulation and heat dissipation.

Main Features:High Efficiency and Energy Saving: Incorporating advanced energy-saving technologies, this product meets the latest energy efficiency standards, minimizing power consumption and reducing operating costs.Eco-Friendly and Safe: The oil-free design removes the risks of fire and leakage commonly found with oil-filled transformers, offering a safer and more environmentally friendly solution.Reliable and Stable Performance: With outstanding overload tolerance and short-circuit resistance, it guarantees reliable, long-term operation in various conditions.Low Noise Operation: Designed to